Push Pull Cable Throttle Control Cable 481662 60-028

Product Description

Part No.	Innerwire Size	Conduit Length	Wire Travel	Material	Finish
NHMAM004	0.06"	72"(1828.8mm)	1-1/2"	Steel	Zinc Plating

Oregon Throttle Control Cable, Z-bend on one end, Wire travel: 1-1/2'', Innerwire diameter: 060''

• Genuine OEM Oregon Part
• Z-bend on one end, Wire travel: 1-1/2'', Innerwire diameter: 0.060''
• Replaces old part numbers including: Rotary 11640; Scag 481662
• Fits various Scag models including:SCZ61RD-31FX, SCZ61RD-921FX, SCZ61V-27FX, SCZ61V-31FX, SCZ61V-32BV, SCZ61V-32CV, SCZ61V-34CV-EFI, SCZ61V-34KH, SCZ61V-36BV, SCZ61V-850FX, SCZ61V-921FX, SCZ72V-31FX, SCZ72V-32CV, SCZ72V-34CV-EFI, SCZ72V-34FX, SCZ72V-34KH, SCZ72V-36BV, SCZ72V-921FX, SMST-72A, SMT-52A, SMT-61A, SMT-61A 31BV Turf Tiger, STT-27KA Turf Tiger, STT-29CH-EFI Tiger , STT-29DFI, STT-29DFI-SS Turf Tiger, STT-29KA-DFI Turf Tiger, STT-31BV Turf Tiger, STT-31BV-SS Turf Tiger, STT-31EFI-SS
• Please note: Consult owner's manual for proper part number identification and proper installation

 

 

Frequently Asked Questions

Q: What are some of the most popular Lawn Mower Parts needed to maintain a dependable starting mower, and get razor sharp cut results every mow?
A: To maintain a dependable and efficient lawn mower with a razor-sharp cutting performance, it's essential to keep various parts in good condition. Here are some of the most important lawn mower parts to focus on:

1. Air Filter and Spark Plug: Regularly clean or replace the air filter for optimal air intake, and replace the spark plug to ensure efficient combustion.
2. Blade Maintenance: Keep the mower blade sharp for a clean cut, avoiding tearing grass. Sharpen or replace the blade as needed.
3. Oil and Fuel System: Change the oil regularly to maintain engine lubrication and clean the fuel filter and lines to ensure a consistent fuel supply.
4. Deck and Wheels: Clean the mower deck to prevent debris buildup and inspect wheels for proper height adjustment and lubricate if necessary.
5. Battery and General Checks: Regularly check and maintain components such as drive belts, controls, exhaust system, and tire pressure.
6. Q: Is a clean air filter really that important?
   A: Yes! A clean air filter is essential for maintaining a dependable and efficient lawn mower. It not only protects the engine from damage but also contributes to fuel efficiency, extended engine life, and overall better mower performance. It's advisable to follow the manufacturer's recommendations for air filter maintenance, including regular cleaning or replacement.
   
   Q: How often do I need to change my spark plugs?
   A: Inspect the mower blade annually and replace it if worn, damaged, or dull. Consider more frequent replacement for intense usage or challenging conditions. Sharpening is an option, but eventual replacement is necessary. Looking at your lawn is a great way to judge the condition of your blades. If it looks cleanly cut, then the blades are going their job. But if the grass looks scalped or choppy, it's time for a blade sharpening or replacement.
   
   Q: What is the number one cause of premature belt wear?
   A: The significant cause of premature belt wear in lawn mowers is excessive tension or improper adjustment. When a mower's drive belt is too tight, it can lead to increased friction, heat, and accelerated wear. Additionally, misalignment or issues with pulleys and other components can contribute to premature belt wear. Finally, mowing the deck too low so that blades scuff or rub against the ground address stress to belts. Regularly inspect and adjust belt tension according to the manufacturer's guidelines to ensure optimal performance and longevity.
   
   Q: When to replace my belt?
   A: Replace your lawn mower belt when you observe visible wear like cracks or fraying, notice significant slack or slipping during operation, hear unusual noises, experience inconsistent cutting, or as per the manufacturer's recommended maintenance schedule. Regular inspection and prompt replacement help prevent unexpected failures and ensure efficient mower performance.
   
   Q: What do I need to know about my belt tensioner?
   A: Make sure the belt tensioner is greased and free to move. If not, the belt will be too loose and slip, or too tight and then stretch and rip. When you grab the belt and pull on it, the tensioner spring and idler pulley should move the same amount. If it will not move or it is stuck, it must be serviced.
   
   Q: Can a PTO clutch be adjusted?
   A: Yes, some PTO clutches can be adjusted. As always though refer to the OEM's specific service and adjustment procedures manual to know if your mower has an adjustable PTO. All this information can be found in your OEM's service maintenance or owner's manual and can vary from Make, Model, and Serial Number. An important note: Sometimes even the date it was produced can influence the design of the PTO clutch within the same serial number!

Ningbo Harsco Machinery Co., Ltd is a professional manufacturer of trailer parts in Ningbo, Zhejiang Province, China since 2016.

We can produce many trailer parts & accessories as follows: Towbars, axles, brake drums, hubs, brake disc, bearings, springs and springs and suspension kits, couplings, mudguards, U-Bolts, Jockey Wheels, keel rollers and brackets, wobble roller, wheel spacer, equalizers and all accessories related to trailers.

If you can send me the drawings or specifications of the trailer parts, mechanical parts and wheels, we can give you our price.

Welcome to enquiry and email me,thanks!

 

 

Q1: Do you have factory?
A: Yes, we have our own factory, own engineers, we can meet custom's unique requirement.

Q2: Can I have a sample order?
A: Yes, welcome sample order to test and check quality. Mixed samples are acceptable.

Q3: It's OK to print my logo on your product?
A: Yes, we can according to your exact requirement.

Q4:How do you ship the goods and how long does it take arrive?
A: We usually shipped by DHL, UPS, FedEx, it usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5: What is your advantages?
A: We are professional supplier for more than ten years, we always put the quality and price at the first place. At the same time, our products are exported to various countries, we have full experience to solve thorny problems.


1-Welcome OEM

1. You can use your own brands or ours, if you use our brand, our professional team will help you design the packing.

2-Our service

1. You inquiry related to our products or prices will be replied in 24 hours.
2. Well-trained and experienced staffs to answer all your enquirys in fluent English.
3. Protection of your sales area, ideas of your design and all your private information.
4. We have a QC team, every product will be checked by them before packed.

3-Welcome to visit

1. When you come to our company visit us, we will arrange a car for picking up and help you book hotel. If you want to visit the local scenic spot, our colleague will accompany you.

4-Warranty

1. Customer should be provide the video and the pictures for the problem products.
2. Products returned within the warranty period must bear product number & date code.

5-After service

1. In production and after delivery, we will track on time and tell you goods situation.
2. When the goods arrived, if you find any design and quality questions, or difference from your samples, please feel free to contact us, we will find the question and solve it with you.