7,000 lbs Trailer Axle Beam with E-Z Lube Spindles - 94" Hub Face 79" Spring Center

• Customization: Available
• Material: Steel
• Max Payload: 3000kg
• Model NO.: TAB032
• Number of Axles: Tandem Axle
• Type: American type axles
• Process: Machining+Welding
• Overall Length: 100"
• Hub Face: 94"
• Spring center: 79"
• Axle Tubing O.D.: 3"
• Spindle size: 1-1/16"
• Inner Bearing: 25580/20
• Outer Bearing: 14125A/14276
• Brake flange configuration: 5 Bolt
• Load Ratings: 7,000 lbs
• Finish: Black Paint
• Transport Package: Strap with Pallet
• Specification: 7, 000 lbs trailer axle beam
• Trademark: HARSCO
• Origin: China
• HS Code: 8708991000
• Production Capacity: 500000PCS/Year

Product Description

Round trailer axle beam measures 94" from hub face to hub face (when hubs - sold separately - are mounted) and 79" from spring center to spring center. E-Z Lube spindles make it easy to lubricate bearings (sold separately).

 

Features:

• Round axle beam acts as part of your trailer's suspension system
  • Replace an axle on your trailer
  • Fabricate a suspension to fit your application
• High-strength steel construction
• Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
  • Best for straight-line acceleration and steady, controlled towing
• Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
  • Low ride height makes it easier to load and unload your trailer
• Straight, E-Z Lube spindles - no drop
  • Built-in grease zerks for simple lubrication
• Spring seats, brake flanges, and spindles are welded on

 

Specs:

• Weight capacity: 7,000 lbs
• Hub-face-to-hub-face length: 94"
• Spring-center-to-spring-center length: 79"
• Tubing outer diameter: 3"
• Bearings (sold separately):
  • Inner bearing: 25580
  • Outer bearing: 14125A
• Brake flange configuration: 5 bolt

 

Axle Dimensions:

 

There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).

 

The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.

 

If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.

 

E-Z Lube Spindles Make Lubrication Simple

The E-Z Lube spindles on this axle are meant to work with E-Z Lube-compatible hubs to make lubricating your bearings quick and easy. Each E-Z Lube spindle has a zerk fitting on the end. And every E-Z Lube hub comes with a grease cap that has an easy-to-remove rubber plug. Just pop out the plug on the cap to access the zerk on the spindle. When you inject grease into the zerk with a grease gun, the grease will flow to both the inner and outer bearings of the hub, lubricating the bearings and forcing out old, ineffective grease. Once you see new grease beginning to be pushed out, you know that your bearings are fully lubricated. This means that you can lubricate the bearings without the mess of taking apart the entire assembly.

PN	Axle Type	Rating	Hub Face to Hub Face	Spring Center To Spring Center	Tubing outer diameter	Brake flange configuration	Finish	Bearings
TAB032	7,000 lbs Trailer Axle Beam	7,000 lbs.	94"	79"	3"	5 Bolt	Black Paint	25580/20;14125A/14276

SELECTING THE PROPER TRAILER AXLE
When selecting an axle for your application remember to consider the following important specifications:

• LOAD CAPACITY:  the load rating of the axle must support the maximum gross vehicle weight rating. For multiple axle trailers divide the GVWR by the number of axles to determine the minimum load capacity of each axle.

• TRACK LENGTH:  measure your axle track length by determining the distance between the center of one tire to the center of the other tire. A more precise measurement can be made by measuring the distance from one 'HUB FACE' to the other. The hub face is also known as the mounting surface where the wheel studs are located.

• SPRING CENTERS:  measure the distance from the center of one spring to the center of the other.
  NOTE: not required for replacement torsion axles

• OVERALL LENGTH:  measure the distance from the very end of an axle's spindle to the very end of the opposite spindle.

• AXLE STYLE:  important when reusing old mounting hardware and also for proper tire clearance. Includes straight axles (round or square), drop axles with offset spindles, and torsion axles. Also consider spindle size when reusing existing hubs or drums.

• AXLE CAMBER:  Most trailer axles are designed with a bend in the tube that will deflect when the load (weight of the trailer) is applied. This will theoretically bring the trailer wheel camber toward a 0 value that is the best setting for most trailer applications. This will allow the tires to wear evenly and allow the longest tread life. Camber can be affected by damage to the axle. For example, if the axle spindle is bent, this will usually cause a negative camber on that side which will cause excess tread wear on the inside of that tire.
  
  
  
   

Ningbo Harsco Machinery Co., Ltd is a professional manufacturer of trailer parts in Ningbo, Zhejiang Province, China since 2016.


 

We can produce many trailer parts & accessories as follows: Towbars, axles, brake drums, hubs, brake disc, bearings, springs and springs and suspension kits, couplings, mudguards, U-Bolts, Jockey Wheels, keel rollers and brackets, wobble roller, wheel spacer, equalizers and all accessories related to trailers.

If you can send me the drawings or specifications of the trailer parts, mechanical parts and wheels, we can give you our price.

Q1: Do you have factory?
A: Yes, we have our own factory, own engineers, we can meet custom's unique requirement.

Q2: Can I have a sample order?
A: Yes, welcome sample order to test and check quality. Mixed samples are acceptable.

Q3: It's OK to print my logo on your product?
A: Yes, we can according to your exact requirement.

Q4:How do you ship the goods and how long does it take arrive?
A: We usually shipped by DHL, UPS, FedEx, it usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5: What is your advantages?
A: We are professional supplier for more than ten years, we always put the quality and price at the first place. At the same time, our products are exported to various countries, we have full experience to solve thorny problems.

If you want to know about our products and us, welcome to enquiry and email me.thanks


1-Welcome OEM

1. You can use your own brands or ours, if you use our brand, our professional team will help you design the packing.

2-Our service

1. You inquiry related to our products or prices will be replied in 24 hours.
2. Well-trained and experienced staffs to answer all your enquirys in fluent English.
3. Protection of your sales area, ideas of your design and all your private information.
4. We have a QC team, every product will be checked by them before packed.

3-Welcome to visit

1. When you come to our company visit us, we will arrange a car for picking up and help you book hotel. If you want to visit the local scenic spot, our colleague will accompany you.

4-Warranty

1. Customer should be provide the video and the pictures for the problem products.
2. Products returned within the warranty period must bear product number & date code.

5-After service

1. In production and after delivery, we will track on time and tell you goods situation.
2. When the goods arrived, if you find any design and quality questions, or difference from your samples, please feel free to contact us, we will find the question and solve it with you.