Alko 10" x 2-1/4" Electric Trailer Brake Assemblies - A Pair

Product Description

10" x 2-1/4" AlkoElectric Trailer Brake Assemblies

Passenger's-side electric trailer brake measures 10" x 2-1/4". Brake pads are made of durable friction material for improved braking and longevity. E-coated backing plate resists rust. Fits 13" to 15" wheels.

Features:

• Electric brakes are easier to install and offer more user control than hydraulic brakes
  • Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
• Automotive-grade friction material is molded to brake shoes
  • Pads are fully bonded - not riveted - to shoes for long life and more braking torque
  • Less chance of cracking and crumbling that can lead to mechanical lockup, thanks to tapered edge and circular grinding
• Periodic manual adjustment required
  • Fine-tooth brake adjustment gear allows for a more precise setting
• E-coated backing plate resists wear and corrosion
• Adjuster plugs (included) cover access holes to keep dirt and grime out of the assembly and off of the shoes
• Brake mounting bolts are included
  • Nuts and lock washers (BRKH10BS) sold separately
• QAI and CSA certified

 

Specs:

• Application: most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO
• Configuration: right hand (passenger's side)
• Dimensions: 10" diameter x 2-1/4" wide
• Mounting flange bolt pattern: 4 bolt
• Wheel size: 13", 14", and 15"
• Axle rating: 3,500 lbs
• Limited 1-year warranty

 

Manual-Adjust Brake

With repeated use of this brake assembly, the brake shoes may move out of alignment, causing less efficient braking performance. To keep the brake shoes aligned and the brake assembly performing correctly, you should perform routine maintenance.

 

This brake assembly should be adjusted after installation and then as needed for the life of the brake. To adjust the brake, use a brake adjustment screw tool (sold separately) to turn the adjustment gear on the inside of the assembly. Continue to turn the gear until the drum surrounding the brake catches on the brake pads enough so that the hub can no longer be turned easily by hand. Then reverse the gear by about 10 clicks. A properly adjusted brake should drag slightly on the brake drum.

 

Thoroughly Tested for Safety

This brake assembly meets the requirements for certification by the Canadian Standards Association (CSA). The CSA creates standards, which when complied with ensure a safe and quality product. This brake assembly underwent extensive testing to measure stopping distances when braking. This brake has also been tested by QAI for braking performance in a complete automotive setup and under real-world conditions to provide the most realistic scenario for the everyday driver.

 

Automotive-Grade Friction Material

Each shoe on this brake assembly is lined with automotive-grade friction material for improved stopping performance and longevity. The friction material is fully bonded onto the surface of the brake shoe. This lining is custom-molded for a perfect fit. The edges are tapered to ensure long-lasting performance. This taper, along with the circular grinding that the lining undergoes, helps to prevent cracking and crumbling. This durability helps to prevent mechanical lockup, which can occur when brake shoes are excessively worn or broken.

 

The friction material is also SAE-N certified, which means that it is an environmentally safe product that complies with California and Washington regulations regarding the composition of brake pads. As a result, this material not only provides high-performance braking that can endure the test of time, but it is also environmentally friendly and safe for use throughout the United States and Canada.

 

12-794 AxleTek 10" x 2 1/4" RH Electric Brake Assembly - Passengers Side - 3.5K Axles

Compare to Dexter 23-27

Part No.	Size	Finish	Axle Ratings	Wheel Size	Application
TEB006	10" diameter x 2-1/4" wide	Black E-Coated	3,500 lbs	13", 14", and 15"	most standard hub-and-drum assemblies, including Dexter, Lippert (LCI), and AL-KO

 

Ningbo Harsco Machinery Co., Ltd is a professional manufacturer of trailer parts in Ningbo, Zhejiang Province, China since 2016.

We can produce many trailer parts & accessories as follows: Towbars, axles, brake drums, hubs, brake disc, bearings, springs and springs and suspension kits, couplings, mudguards, U-Bolts, Jockey Wheels, keel rollers and brackets, wobble roller, wheel spacer, equalizers and all accessories related to trailers.

If you can send me the drawings or specifications of the trailer parts, mechanical parts and wheels, we can give you our price.

Welcome to enquiry and email me,thanks!

 

 

Q1: Do you have factory?
A: Yes, we have our own factory, own engineers, we can meet custom's unique requirement.

Q2: Can I have a sample order?
A: Yes, welcome sample order to test and check quality. Mixed samples are acceptable.

Q3: It's OK to print my logo on your product?
A: Yes, we can according to your exact requirement.

Q4:How do you ship the goods and how long does it take arrive?
A: We usually shipped by DHL, UPS, FedEx, it usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5: What is your advantages?
A: We are professional supplier for more than ten years, we always put the quality and price at the first place. At the same time, our products are exported to various countries, we have full experience to solve thorny problems.


1-Welcome OEM

1. You can use your own brands or ours, if you use our brand, our professional team will help you design the packing.

2-Our service

1. You inquiry related to our products or prices will be replied in 24 hours.
2. Well-trained and experienced staffs to answer all your enquirys in fluent English.
3. Protection of your sales area, ideas of your design and all your private information.
4. We have a QC team, every product will be checked by them before packed.

3-Welcome to visit

1. When you come to our company visit us, we will arrange a car for picking up and help you book hotel. If you want to visit the local scenic spot, our colleague will accompany you.

4-Warranty

1. Customer should be provide the video and the pictures for the problem products.
2. Products returned within the warranty period must bear product number & date code.

5-After service

1. In production and after delivery, we will track on time and tell you goods situation.
2. When the goods arrived, if you find any design and quality questions, or difference from your samples, please feel free to contact us, we will find the question and solve it with you.